篮球比分直播_欧洲篮球联赛-竞彩足球推荐

图片

How to connect to Wi-Fi on campus (Android CA certificate settings)

※If you were unable to select “None” or “Do not validate” for the CA certificate selection item when setting up Wi-Fi, follow the steps below to set it up.

(1) Open the Wi-fi settings on the smartphone.

*Long press the Wi-Fi symbol, or select ‘Gear’ icon ?=> Wi-Fi menu, etc.

(2)?Select wifi-setup
(3) Enter the following passcode. The other fields do not need to be changed.

Passcode: wifi-setup

? (4) Confirm that the connection is “Connected”.

*Ignore a message such as “You are not connected to the Internet” is displayed.

(5)On the login screen, enter the log in user name and password for the campus PC.

Example) user name: e2029000x

(6) When the certificate download page appears, select ‘Download certificate’.
(7) In addition, a password input screen is displayed, enter the following.

Password: nufswifi

(8) For the type of certificate, select the following.

Type: Wi-Fi certificate

(9) Open the Wi-Fi settings screen again and select ‘NUFS-WL000‘ from the available networks.
(10) Set up as follows.

EPA method: PEAP

Phase 2 authentication: MSCHAPV2

CA certificate: cai-WIFI-ADSV1-CA
*If the above cannot be selected, start over from (6) of this procedure. You may select ‘None’ or ‘Do not validate’.

Domain: cai.local.nagasaki-gaigo.ac.jp

ID (Identity) : Log in ID for campus PC.
*(e.g. e2023000x)

Anonymous ID (Identity): (Leave blank)

Password: Log in password for campus PC

Privacy: (No need to change)

(11) When the configuration is complete, check that the NUFS-WL000 is shown as connected and the configuration is complete.

*Once all settings have been deleted, delete the ‘wifi-setup’ connection that was connected in (4).


Related notices

No related notice available now